Clear PET film · 190±10gsmFilm rollEC-TAPE70
One side carries a FreePost® removable cling layer — Easy Cling™ flat cling, WALLIZARD® micro-dot or Spider™ dot adhesive — the other a high-tack permanent adhesive. The permanent side laminates to the back of a print; the removable side applies to glass or smooth walls and peels away clean.
Full specifications
All values nominal ± tolerance, measured on standard production lots.
| Model | EC-TAPE70 |
|---|---|
| Base / Surface | Clear PET film, Easy Cling™ low-tack removable side + high-tack permanent side |
| Adhesion system | Double-Sided Cling & Adhesive Tape |
| Print compatibility | Not printed — for laminating prints |
| Film thickness | 60±6 μm |
| Total thickness | 160±8 μm |
| Total weight | 190±10 gsm |
| 180° peel adhesion | 5~15 / ≥1000 g/25mm |
| Release force | <20 / <10 g/25mm |
| Release liner | Clear PET liner (both sides) |
| Available sizes | Rolls |
| Appearance | Transparent |
| Indoor / outdoor | Indoor |
| Shelf life |
Installation
- The application area should be clean and free of dirt.
- Using water to assist applying the material is not necessary and not recommended.
Storage
- Store at temperature conditions of 10～25℃ (50～77℉) and 50% relative humidity.
- We recommended that you always keep this product in its original packaging.
Cautions
- Due to different applying surfaces and environments, we cannot guarantee the material will work in every condition. Please test on the applying surface before large-scale use.
Where EC-TAPE70 goes to work
Common questions about EC-TAPE70
Q1What is FreePost® double-sided tape used for?
FreePost® double-sided tape laminates onto the back of any printed graphic and turns it into a removable window or wall cling. One side is a high-tack permanent adhesive that bonds to the print; the other is a FreePost® removable cling layer — Easy Cling™ flat cling, WALLIZARD® micro-dot or Spider™ dot adhesive — that applies to glass or smooth walls and peels away without residue.
Q2Which FreePost® tape model should I choose?
Match the removable side to your application: EC-TAPE70 uses the Easy Cling™ flat cling layer (peel 5~15 g/25mm), WL-TAPE60 the WALLIZARD® micro-dot layer (50~80 g/25mm), and SP-TAPE60Z the Spider™ dot layer (200~400 g/25mm) for a stronger removable hold. DAC-TAPE140 carries high-tack permanent adhesive on both sides for long-term mounting. All four are supplied in rolls.
Q3Can FreePost® double-sided tape be printed on?
No. The tape is a laminating and mounting product, not a print medium. Print your graphic on a suitable film or paper first, then laminate the tape's permanent side to the back of the print and apply the removable side to glass or a smooth wall.
Other models in this series
4 models in total — view the full comparison table →
Not sure this model fits?
Use the guided finder to shortlist models by surface, duration, installation and print system.
Test EC-TAPE70 on your own printer
我们向全球寄送 A4 与卷材样品。告诉我们您的打印机型号与目标表面——工程师将确认兼容性并在一个工作日内报价。