CLDL
A heat-stable coating engineered for dry toner rather than ink — it takes the fuser at 180℃+ without blistering or curling, and fixes toner with photographic gloss or a clean matte finish.
Full specifications
All values nominal ± tolerance, measured on standard production lots.
| Model | CLDL |
|---|---|
| Base / Surface | Matte colour-laser paper, Matte |
| Print compatibility | Laser toner |
| Total weight | 160/200/250/300 gsm |
| Available sizes | Sheets |
| Appearance | White, matte |
| Indoor / outdoor | Indoor |
| Shelf life | Two years |
Storage
- Store at temperature conditions of 10～25℃ (50～77℉) and 50% relative humidity.
- We recommended that you always keep this product in its original packaging.
Cautions
- To optimize print results, printer needs to be set for highest print quality.
- Select the media setting that matches the paper weight and finish.
Where CLDL goes to work
Common questions about CLDL
Q1Can I run photo paper through a colour-laser printer?
Not ordinary inkjet photo paper — its coating melts or blisters at fuser temperature. ZST colour-laser paper (CLDG glossy, CLDL matte) uses a heat-stable toner-receptive coating rated for production laser and LED presses, so it runs without blistering, curl or jamming.
Q2What weights and finishes does ZST colour-laser paper come in?
CLDG glossy runs 120g, 140g, 160g, 180g, 200g, 250g and 300g; CLDL matte runs 160g, 200g, 250g and 300g. Both are supplied as sheets, with OEM/ODM custom sizes and packaging available.
Q3Do laser prints need drying time before stacking?
No. Toner is fused to the sheet by heat rather than absorbed as liquid ink, so prints leave the press dry and can be stacked, folded or finished immediately without offsetting in the output tray.
Not sure this model fits?
Use the guided finder to shortlist models by surface, duration, installation and print system.
Test CLDL on your own printer
我们向全球寄送 A4 与卷材样品。告诉我们您的打印机型号与目标表面——工程师将确认兼容性并在一个工作日内报价。