RC (resin-coated) photo paper · 260gsm
Paper / film rollCoating close-up, macroPrint sampleR3-Silk
Resin-coated (RC) construction: a microporous ink-receiving layer over a PE-sealed paper core — true photo-lab stiffness, flatness and water resistance, in glossy, satin, luster and silk finishes.
Full specifications
All values nominal ± tolerance, measured on standard production lots.
| Model | R3-Silk |
|---|---|
| Base / Surface | RC (resin-coated) photo paper, Silk |
| Print compatibility | Water-Based (Dye), Water-Based (Pigment) |
| Total weight | 260 gsm |
| Available sizes | Sheets; rolls 305 / 432 / 610 / 914 / 1118 / 1270 / 1520 mm |
| Appearance | Silk |
| Indoor / outdoor | Indoor |
| Shelf life | Two years |
Storage
- Store at temperature conditions of 10～25℃ (50～77℉) and 50% relative humidity.
- We recommended that you always keep this product in its original packaging.
Cautions
- To optimize print results, printer needs to be set for highest print quality.
- Select the media setting that matches the paper weight and finish.
Where R3-Silk goes to work
Common questions about R3-Silk
Q1What does RC mean in RC photo paper?
RC stands for resin-coated: the paper core is sealed in polyethylene on both sides, then topped with a microporous ink-receiving layer. The result is true photo-lab stiffness, flatness and water resistance that plain coated paper cannot match.
Q2Is ZST RC photo paper compatible with Epson, Fujifilm and Noritsu printers?
Yes. The RC series works with both water-based dye and pigment inks and matches Epson, Fujifilm and Noritsu photo-lab workflows. Four plain finishes — R-Glossy, R1-Satin, R2-Luster and R3-Silk — run 200g to 260g in sheets and rolls up to 1520 mm wide.
Q3Which RC finish should I choose — glossy, satin, luster or silk?
R-Glossy gives maximum shine and color pop for display prints; R1-Satin and R2-Luster offer a softer sheen with good fingerprint resistance for portfolios and albums; R3-Silk adds a fine textured feel for premium work. All four share the same RC base and ink compatibility.
Q4Does ZST offer self-adhesive RC photo paper?
Yes — GJRC (high-gloss) and SJRC (satin) are self-adhesive RC papers in 200g and 260g, supplied in sheets and 1050 mm rolls. They pair photo-lab image quality with a peel-and-stick back for display panels, signage and mounted prints.
Not sure this model fits?
Use the guided finder to shortlist models by surface, duration, installation and print system.
Test R3-Silk on your own printer
我们向全球寄送 A4 与卷材样品。告诉我们您的打印机型号与目标表面——工程师将确认兼容性并在一个工作日内报价。