Light heat transfer paper · 150gsm
Paper / film rollCoating close-up, macroLHT
A family of transfer systems: TATTOO-B water-transfer paper laminated with the TATTOO-A medical adhesive film for skin tattoos, light and dark heat-transfer papers for cotton garments, sublimation paper for polyester and coated blanks, and a PVC card paper for ID badges.
Full specifications
All values nominal ± tolerance, measured on standard production lots.
| Model | LHT |
|---|---|
| Base / Surface | Light heat transfer paper, Matte printable coating |
| Print compatibility | Water-based dye, Water-based pigment |
| Total weight | 150 gsm |
| Appearance | White, matte |
| Indoor / outdoor | Indoor |
| Shelf life | One year |
Storage
- Store at temperature conditions of 10～25℃ (50～77℉) and 50% relative humidity.
- We recommended that you always keep this product in its original packaging.
Cautions
- To optimize print results, printer needs to be set for highest print quality.
- Select the media setting that matches the paper weight and finish.
Where LHT goes to work
Common questions about LHT
Q1How does ZST temporary tattoo paper work?
It is a two-part water-transfer system. Print the design on TATTOO-B transfer paper, laminate the TATTOO-A medical-grade adhesive film over the print, cut out the tattoo, then press it onto the skin with water and peel away the paper backing.
Q2Which printers can print ZST tattoo paper?
TATTOO-B transfer paper prints on water-based inkjet (dye and pigment), laser toner and UV presses (sheet or roll). TATTOO-A is the companion adhesive film and is not printed. Both parts are available in sheets and rolls.
Q3Is ZST tattoo paper safe on skin?
The TATTOO-A film uses a medical-grade adhesive formulated for skin contact in temporary tattoo applications. As with any skin product, apply to clean intact skin and discontinue use if irritation occurs.
Not sure this model fits?
Use the guided finder to shortlist models by surface, duration, installation and print system.
Test LHT on your own printer
我们向全球寄送 A4 与卷材样品。告诉我们您的打印机型号与目标表面——工程师将确认兼容性并在一个工作日内报价。