WL-PET140EW9
SCITOP patented micro-cling and air-channel technology — a gecko-toe inspired, non-static design. Dot-pattern WALLIZARD® removable cling applies bubble-free to smooth surfaces and leaves no residue.
Full specifications
All values nominal ± tolerance, measured on standard production lots.
| Model | WL-PET140EW9 |
|---|---|
| Base / Surface | White PET film, Matt white surface |
| Adhesion system | WALLIZARD® Gecko Toe Pad Cling Film |
| Print compatibility | Eco-solvent, Latex, UV Digital, Offset, Toner |
| Film thickness | 140±9 μm |
| Total thickness | 190±12 μm |
| Film weight | 175±11 gsm |
| Total weight | 245±15 gsm |
| 180° peel adhesion | 10~30 g/25mm |
| Release force | <40 g/25mm |
| Appearance | White |
| Indoor / outdoor | Indoor & outdoor |
| Shelf life | Two years |
Installation
- The application surface must be smooth, clean and free of dirt.
- Do not use water. After positioning, squeegee evenly with a cloth from one narrow edge to the other, pressing every area so the film lies flat with no internal stress. If an area is uneven, peel back to the even section and re-apply slowly. Recommended graphic size: no larger than 3.0 m² per sheet.
Storage
- Store sealed, away from light, in the original packaging.
- Store at 15～30℃ (59～86℉) and 40~70% relative humidity.
Cautions
- To optimize print results, set the printer to its best print mode before printing.
- Avoid hand oil and dirt contaminating the print surface.
- Keep the film flat during application — creases and wrinkles will affect cling.
- Due to different applying surfaces and environments, we cannot guarantee the material will work in every condition. Please test on the applying surface before large-scale use.
Where WL-PET140EW9 goes to work
Common questions about WL-PET140EW9
Q1What is gecko toe pad cling technology in WALLIZARD® film?
WALLIZARD® uses SCITOP's patented gecko toe pad cling technology — a biomimetic micro-structured backing that grips smooth surfaces like a gecko's foot. It is non-static and uses no traditional adhesive, so the film clings to most clean smooth surfaces and removes with absolutely no residue, even after long application periods.
Q2Can WALLIZARD® film be used both indoors and outdoors?
Yes. WALLIZARD® suits short- and long-term indoor and outdoor applications — seasonal retail sales, trade shows, office posters and signage — on most clean, smooth surfaces such as glass and metal.
Q3Is WALLIZARD® film reusable?
Yes. WALLIZARD® is removable, repositionable and reusable. The gecko-toe backing keeps its grip through repeated applications, and installation needs no water and no skilled labour — bubble-free by design.
Q4How do you install WALLIZARD® film?
The surface must be smooth, clean and free of dirt. Do not use water. After positioning, squeegee evenly with a cloth from one narrow edge to the other so the film lies flat with no internal stress. Recommended graphic size: no larger than 3.0 m² per sheet.
Other models in this series
11 models in total — view the full comparison table →
Not sure this model fits?
Use the guided finder to shortlist models by surface, duration, installation and print system.
Test WL-PET140EW9 on your own printer
我们向全球寄送 A4 与卷材样品。告诉我们您的打印机型号与目标表面——工程师将确认兼容性并在一个工作日内报价。