White PP film · 185±11gsmFilm rollAdhesion backing, macroPrint sampleOT-PP250EW
Powered by SCITOP's patented octopus micro suction technology — the film clings to clean, smooth and flat surfaces without chemical adhesive, and can be repositioned and reused.
Full specifications
All values nominal ± tolerance, measured on standard production lots.
| Model | OT-PP250EW |
|---|---|
| Base / Surface | White PP film, Matt white |
| Adhesion system | Octopus™ Micro Suction Film |
| Print compatibility | Eco-solvent, UV Digital, Latex, UV Offset |
| Film thickness | 210±13 μm |
| Total thickness | 260±16 μm |
| Film weight | 140±9 gsm |
| Total weight | 185±11 gsm |
| 180° peel adhesion | 5~30 g/25mm |
| Release force | <15 g/25mm |
| Release liner | Semi-clear BOPP liner |
| Appearance | Matt white |
| Indoor / outdoor | Indoor |
| Shelf life | One year |
Installation
- The application area should be clean and free of dirt.
- Using water to assist applying the material is not necessary and not recommended. Use the scraper directly to post evenly, do not spray to post.
Storage
- Keep sealed and protected from light, store in the original packaging.
- Recommended storage temperature 15℃～25℃ with 40-60% relative humidity.
Cautions
- Not recommended for outdoor usage.
- To optimize print results, printer needs to be set for highest print quality.
- Prevent dust and oil stains on hands from contaminating the printing surface.
- Keep the film flat during application, crease and curing will affect the adhesion persistence.
- Due to different applying surface and environment, we can not guarantee the material will work on every condition. Please always test on applying surface before large scale usage.
- Suitable for most clean, smooth and flat surfaces, such as: Glass, Metal, etc. (Not suitable for acrylic display surface)
Where OT-PP250EW goes to work
Common questions about OT-PP250EW
Q1How does Octopus™ micro suction film stick without adhesive?
Octopus™ uses SCITOP's patented micro suction technology: thousands of microscopic suction cups on the film's backing create a gentle vacuum grip on clean, smooth, flat surfaces such as glass and metal — no chemical adhesive, so it repositions and reuses easily and leaves no residue within its shelf life for indoor use.
Q2Can Octopus™ film be reused after removal?
Yes. Because Octopus™ clings by micro suction rather than glue, it is removable, repositionable and reusable — you can peel it off, move it to another clean smooth surface and reapply it. Keep the suction side clean for best grip.
Q3What surfaces is Octopus™ film suitable for?
Octopus™ suits most clean, smooth and flat surfaces such as glass and metal panels. It is intended for indoor use away from strong direct light, and is not recommended for acrylic display surfaces.
Q4Does Octopus™ film apply bubble-free?
Yes — the micro suction structure vents air during application, so Octopus™ applies bubble-free with a simple scraper. No water or skilled installer is needed: position the film, then squeegee evenly from one narrow edge to the other.
Other models in this series
2 models in total — view the full comparison table →
Not sure this model fits?
Use the guided finder to shortlist models by surface, duration, installation and print system.
Test OT-PP250EW on your own printer
我们向全球寄送 A4 与卷材样品。告诉我们您的打印机型号与目标表面——工程师将确认兼容性并在一个工作日内报价。