OT-PP250EWB
Powered by SCITOP's patented Octopus micro-cling technology — negative-pressure hold with a micro adhesive layer. The film repositions easily, applies bubble-free, and leaves no residue in short-term indoor use.
Full specifications
All values nominal ± tolerance, measured on standard production lots.
| Model | OT-PP250EWB |
|---|---|
| Base / Surface | White PP film, Matt white surface, grey adhesive, 100% blackout |
| Adhesion system | Octopus™ Micro Cling Film |
| Print compatibility | Eco-solvent, UV Digital, Latex, UV Offset |
| Film thickness | 205±12 μm |
| Total thickness | 255±15 μm |
| Film weight | 140±8 gsm |
| Total weight | 185±11 gsm |
| 180° peel adhesion | 5~30 g/25mm |
| Release force | <15 g/25mm |
| Appearance | Matt white, grey adhesive, 100% blackout |
| Indoor / outdoor | Indoor |
| Shelf life | One year |
Installation
- The application surface must be clean and free of dirt.
- Do not use water. After positioning, squeegee evenly from one narrow edge to the other, pressing every area so the film lies flat with no internal stress.
Storage
- Store sealed, away from light, in the original packaging.
- Store at 10～25℃ (50～77℉) and 30~60% relative humidity.
Cautions
- To optimize print results, select the best print mode for the weight, material and surface before printing.
- Avoid hand oil and dirt contaminating the print surface.
- Keep the film flat during application — creases and wrinkles will affect cling.
- Due to different applying surfaces and environments, we cannot guarantee the material will work in every condition. Please test on the applying surface before large-scale use.
- Suitable surfaces: smooth glass, smooth painted metal, smooth plastic boards (except acrylic displays), smooth furniture and smooth tiles.
- Indoor use only — keep the adhesive side away from sunlight.
Where OT-PP250EWB goes to work
Common questions about OT-PP250EWB
Q1How does Octopus™ film cling to a surface?
Octopus™ uses SCITOP's patented micro-cling technology: a micro adhesive layer with negative-pressure hold. The film applies bubble-free, repositions easily, and leaves no residue in short-term indoor use on clean, smooth, flat surfaces such as glass and painted metal.
Q2Can Octopus™ film be reused after removal?
Yes. The film is designed to be repositioned and reapplied. Peel it off, move it to another clean smooth surface and squeegee it down again. Keep the cling side clean for best hold. Residue-free removal is specified for short-term indoor use.
Q3What surfaces is Octopus™ film suitable for?
Octopus™ suits smooth glass, painted metal, plastic boards (except acrylic displays), furniture and tiles. It is for indoor use only — keep the adhesive side away from sunlight.
Q4Does Octopus™ film apply bubble-free?
Yes — it is specified as bubble-free. Apply dry: clean the surface, position the film, then squeegee evenly from one narrow edge to the other so every area is pressed flat with no internal stress. Water is not recommended.
Other models in this series
4 models in total — view the full comparison table →
Not sure this model fits?
Use the guided finder to shortlist models by surface, duration, installation and print system.
Test OT-PP250EWB on your own printer
我们向全球寄送 A4 与卷材样品。告诉我们您的打印机型号与目标表面——工程师将确认兼容性并在一个工作日内报价。