SP-PP200WW8
Dot shaped removable adhesive on one side with liner — the dot pattern allows air to escape for a bubble-free application, and the adhesive stays removable for short term indoor use.
Full specifications
All values nominal ± tolerance, measured on standard production lots.
| Model | SP-PP200WW8 |
|---|---|
| Base / Surface | White PP film, Matt white surface |
| Adhesion system | Spider™ Dot Adhesive Film |
| Print compatibility | Water-based dye, Water-based pigment, Indoor aqueous wide-format, UV Digital, Latex |
| Film thickness | 200±12 μm |
| Total thickness | 250±15 μm |
| Film weight | 115±7 gsm |
| Total weight | 160±10 gsm |
| 180° peel adhesion | 200-400 g/25mm |
| Release force | <15 g/25mm |
| Appearance | White |
| Indoor / outdoor | Indoor |
| Shelf life | One year |
Installation
- The application surface must be clean and free of dirt.
- Do not use water. After positioning, squeegee evenly with a cloth from one narrow edge to the other, pressing every area so the film lies flat with no internal stress. If an area is uneven, peel back to the even section and re-apply slowly.
Storage
- Store sealed, away from light, in the original packaging.
- Store at 15～30℃ (59～86℉) and 40~70% relative humidity.
Cautions
- To optimize print results, set the printer to its best print mode before printing.
- Avoid dust, oil and dirt contaminating the print surface and the adhesive side.
- Keep the film flat during application — creases and wrinkles will affect cling.
- Due to different applying surfaces and environments, we cannot guarantee the material will work in every condition. Please test on the applying surface before large-scale use.
Where SP-PP200WW8 goes to work
Common questions about SP-PP200WW8
Q1Why does Spider™ film use a dot-pattern adhesive?
Spider™ carries a dot-shaped removable adhesive: the gaps between dots let air escape during application, giving a bubble-free finish without special tools, while the reduced glue contact keeps the film cleanly removable for short-term indoor graphics.
Q2Is Spider™ film removable?
Yes. Spider™ uses a removable dot adhesive designed for short-term indoor applications such as trade shows and seasonal sales — it applies and removes quickly on many kinds of surfaces.
Q3Is Spider™ film PVC-free?
The PET and PP models in the Spider™ series are PVC free, making them an environmentally friendly choice for short-term promotional graphics.
Q4Does Spider™ film need water or professional installation?
No. Clean the surface and apply dry — using water is not necessary and not recommended. The dot adhesive vents air by itself, so installation is easy, quick and bubble-free.
Other models in this series
9 models in total — view the full comparison table →
Not sure this model fits?
Use the guided finder to shortlist models by surface, duration, installation and print system.
Test SP-PP200WW8 on your own printer
我们向全球寄送 A4 与卷材样品。告诉我们您的打印机型号与目标表面——工程师将确认兼容性并在一个工作日内报价。